The direction of rotation of a grinding machine to the right, so that debris can fly wheel down.
After two grinding machine starts grinding the diamond reinforced conrete grinding machine should rotate smoothly again. If the grinder beating obviously, should be promptly stopped trimming.
Should be maintained between 3 wheel drive bracket and wheel 3mm distance to prevent the workpiece tie into the accident.
4 should stand on the side of the grinding wheel machines, and force should not be too large.
5 revolutions consistent wheel wheel according to the instructions for use, select the grinder spindle.
6 new leader of the wheel have factory certification, testing or inspection mark. When installing the front wheel if found quality, hardness, size and appearance of cracks and other defects, can not be used.
7 When installing wheel, wheel spindle bore with the gap should not be too tight, should be loose with the technical requirements, the general control 0.05? / FONT> between 0.10 mm.
8 wheel flange fitted to both sides, with a diameter of not less than one-third the diameter of the wheel should be a good cushion pad between the grinding wheel and the cutting disc china flange.
9:00 tighten the nut, use special wrench, not overtighten prohibited hammer with a hard thing to prevent wheel hit by fragmentation.
10 wheel installed, to install shields, baffles and brackets. The gap between the baffle and the bracket and the wheel should be maintained at 1? / FONT> 3 mm, and slightly lower than the center of the wheel.
When newly installed wheel 11 starts, not too fast, before inching check after 5? / FONT> try after 10 minutes turn, can be used.
Early 12 not overexert when grinding wheel in order to avoid uneven stress and accidents.
13 prohibits grinding copper, lead, wood and other things, to prevent wheel impaction.
When 14 Brothers, who should stand side grinders, allowed two people on a sharpening wheel.
15 times longer tool sharpening, should be promptly cooled to prevent hot.
16 often trimmed balance wheel surface, maintained in good condition.
17 Brothers personnel should wear tile granite cutting wheel protective glasses.
18 Vacuum Cleaner must be intact and effective, if found fault should be repaired, should stop sharpening.
没有评论:
发表评论